Best Methods to Fix Driver Power State Failure in Windows 10


Some Windows 10 users reported that they faced a blue screen error or driver_power_state_failure when they were updating the Windows system. This is terrible to have such error when you are expecting an improvement after having the updates installed on your computer. If you are experiencing this error at the moment, you can check the best methods to fix driver Power State Failure on Windows 10.

Related Topics:

Video Tutorial Windows 10


What Is The Driver Power Failure Error?

The Driver Power State Failure error occurs when you are using your computer, or you are upgrading the operating system for Windows 10. The causes behind this problems may be different, but the one that can say about it is that problems affected your drivers always cause it. There might be uncertainties that you are using the drivers that either outdated or incompatible. So this point will give you an idea to fix whatever is wrong.

But even if you may not get the problem, don’t worry. We are here to help you in this, too. So first make sure you are getting and dealing with the right problem. That’s why first check that you have to get the following message:

Your PC ran into a problem and needed to restart. We’re just collecting some error info, and then we’ll restart for you. If you’d like to know more, you can search online later for this error: DRIVER_POWER_STATE_FAILURE.

If it displays the same message, then go to the solution listed below.

How To Fix Windows 10 Driver Power State Failure?

Method 1: Uninstall the drivers with a problem

When you get driver power state failure error, then enter Safe Mode of pc and reboot it. Check for the driver status in Device Manager. If it shows yellow mark next to a device, you can uninstall that device. But first, enter safe mode. If you know how to enter safe mode, it is good but if you don’t know then follow the first case given below.

Case 1. When you cannot boot Windows 10 successfully
Case 2. When you can boot Windows successfully

If you cannot boot Windows successfully, please follow steps below to enter safe mode:

Step 1: First Reboot your PC.

Step 2: After rebooting the PC, the system prepares automatic repair. After that, startup repair window will appear. Click on the advanced options; then the system will direct the display to Windows Recovery environment.

Step 3: If the startup repair window doesn’t appear, then restart Windows again.

Video Tutorial Windows 10

Step 4: In Windows Recovery environment (RE), click on the Troubleshoot option.

Video Tutorial Windows 10

Step 5: Next, click on advanced options.

Video Tutorial Windows 10
Step 6: Now, Click on Startup Settings.

Video Tutorial Windows 10
Step 7: After that click on Restart.

Video Tutorial Windows 10
Step 8: On your keyboard, press key number 4 to enter Safe Mode.

Video Tutorial Windows 10
After, booting windows successfully, follow the step to enter safe mode:

#1. Press windows key from your keyboard and R at the same time to invoke a Run command.

#2. Next, type msconfig and click the OK tab.

Video Tutorial Windows 10
#3. From system configuration click on Boot tab. Under the Boot options, check Safe boot and click ok.

Video Tutorial Windows 10
#4. So after entering safe mode and Click Restart.

Video Tutorial Windows 10
Secondly, uninstall the drivers with a problem:
Once you enter the safe mode, follow the steps below to uninstall the problem drivers.

Step 1: Press windows key and R together to invoke a Run command.

Step 2: Now in run command, type devmgmt.msc and click the OK tab.

Video Tutorial Windows 10
Step 3: Next, enlarge the category and find the device with a yellow mark and right click on the device.

Step 4: Select the uninstall option from a list.

Step 5: Now, repeat all the steps to uninstall all drives with yellow mark and reboot your PC.

IMPORTANT NOTE: If you enter safe mode in Windows Normal Mode, uncheck Safe boot after you uninstall the drivers. Then reboot your PC.

Video Tutorial Windows 10

Method 2: Update the drivers

If the above step does not resolve a problem, then follow this method of update drivers. First of all, check all your devices have the right updated drivers. If it is not updated correctly, then update it. You can update it manually, and if you are not able to update drivers manually, then you can update them automatically using Driver Easy.

You can update your drivers automatically with Driver easy either the Pro version or FREE version. But with the Pro version, it takes just two clicks for an update of all drivers, and you get full support. To update driver follow the steps given below:

Step 1: Download and install Driver Easy.

Step 2: Now open the software and run it by click on the Scan Now tab. Driver Easy will scan your computer automatically and detect if there is any problem in the drivers.

Read Also:  Fix “Class Not Registered” Error in Windows 10

Video Tutorial Windows 10
Step 3: Next, click on the Update button near to any selected device or select update all tab which is given at the bottom of the page to download and install the correct version of its driver automatically.

Video Tutorial Windows 10

Method 3: System Restore

System Restore can do via restoring the previous version of your Windows OS, and it may fix driver power state failure in windows 10. To fix the problem follow the steps given below:

Step 1: First Right-click the “My Computer” and go to the Property.

Step 2: Go to the System Protection. Inside it choose the System Restore.

Step 3: After selecting it, click on Next and wait for the system to be restored. And all set!

Video Tutorial Windows 10
Now check your problem solved or not.

Method 4: Change your Power settings

Sometimes driver state power failure can appear due to power settings. So follow the steps given below:

Step 1: Press Windows Key and S together to open control panel. Select control panel from the list.

Video Tutorial Windows 10
Step 2: From the control panel find power option from it.

Video Tutorial Windows 10
Step 3: Select Choose what the power button does option.

Video Tutorial Windows 10
Step 4: Next, click on Change settings that are currently an unavailable option.

Video Tutorial Windows 10
Step 5: Deactivate Turn of fast startup (recommended), Sleep and Hibernate options. Click on Save changes tab.

Video Tutorial Windows 10

Method 5: Change power plan setting

Some users are told that change in power plan setting can also sometimes solve the problem. To do that, follow these steps:

Step 1: From the control panel select the Power options. Find your currently selected plan and click on Change plan settings.

Video Tutorial Windows 10
Step 2: Next, click on Change advanced power settings option.

Video Tutorial Windows 10
Step 3: Now you will see a list of all settings. Open the Sleep section and Sleep and Hibernation option set to Never. In Power buttons and lid option, set to Do nothing and click on Apply and OK to save changes.

Video Tutorial Windows 10

Method 6: Disable or remove your antivirus software

Antivirus software for PC is essential, but seldom your antivirus can interfere with Windows and lead to Driver Power State Failure error to occur. To solve this problem, temporarily disable your antivirus software and check if that solves the problem. If not, you might have to uninstall your antivirus software completely.

Method 7: Revert your graphics card drivers to the older version

Sometimes windows 10 driver power state failure error can appear due to your graphics card drivers. To solve this problem, it is suggested to roll back to the older driver. You can do it by following these steps:

Step 1: Open Device Manager.

Step 2: Go to the Display adapters section and double-click on your graphics card.

Video Tutorial Windows 10
Step 3: It will open window Properties, go to the Driver tab and click on Roll Back Driver button. Wait until the process to finish.

Video Tutorial Windows 10
If Roll Back option is not available, then uninstall your graphics card driver from Device Manager. After uninstalling the graphics card, visit your graphics card manufacturer’s website and download the older version of the driver. Install it and check your problem is solved it or not.

Method 8 – Change Power settings in Nvidia Control Panel

As per some users, Driver Power State Failure problem can cause due to your power settings. This problem appears most of the time while using Nvidia graphics, so to fix it by the steps given below:

Step 1: Open Nvidia Control Panel.

Step 2: From the left side, select Manage 3D settings.

Step 3: Inside this option, select dedicated graphics card as preferred graphics processor from the right side. In the list of setting, find Power management mode and select Prefer maximum performance.

Step 4: Save changes and check your problem is solved or not.

Method 9: Upgrade the BIOS to Fix Driver Power State Failure Error

You could find the BIOS information on your device and then search for the BIOS updates on the manufacturer’s support website which provides the download.


That’s it! We do hope the error disappears permanently after you try one of the methods from our list in here. We know how annoying the trouble is, hence fixing it as soon as possible is the best thing you can do.

Do you have other methods that are not in the list above? Share us your thought. We will be glad to add it on the article. For queries and suggestions, feel free to write in the comments box. Thank you!

Some Useful Article:

How to Take Screenshot in Windows 10?
Windows 10 ISO Direct Download Without Windows 10 Media Creation Tool
How To Fix Windows 10 Taskbar Not Working?
Fix “Class Not Registered” Error in Windows 10
Problem With Wireless Adapter or Access Point on Windows 10

Scroll to Top