Fixed Wi-Fi doesn’t have a valid IP configuration

Advertisement

Windows 10

Wifi  ( Wireless Network Connection) doesn’t Have a Valid IP Configuration

In most cases, Windows Troubleshooting may just find problems but not provide fixes. Problem “WiFi doesn’t have a valid IP configuration”  is the case. You need to solve it manually. Here you will learn How To Fix this problem on Windows 10.

Advertisement

The problem can be caused by several problems, such as incorrect network settings, faulty network drivers. Use the solutions below then the problem should resolve.

Solution 1: Release and renew IP address

In some cases, this solution would work if there is problem with the network. And many users reported it helped them with WiFi doesn’t have a valid IP configuration problem. Follow steps below and it may work like a charm for you.

1. Open Command Promptas an administrator.

2. In Command Prompt, type ipconfig /release and hit Enter.

Windows 10

3. Then type ipconfig /renew and hit Enter.

Windows 10

4. Type Exit and hit Enter.

Solution  2: Reset TCP/IP

Follow these steps:

1. Open Command Prompt as an administrator.

2. When Command Prompt opens, type netsh winsock reset and hit Enter.

Windows 10


3. Then type netsh int ip reset and hit Enter.

Windows 10

4. Restart your computer and see if the problem resolves.

Solution 3: Manually set IP address

If you have a home network with several computers, the IP address of each computer will be automatically assigned . To fix the problem, you can try to reset the IP on the computer that has the network problem.

Follow these steps:

1. Open Control Panel.

2. View by Small icons, click Network and Sharing Center.

Windows 10

3. Select Change adapter settings in the left pane.

Windows 10

4. Right-click on WiFi connection (In my case, the WiFi connection is DriverEasy.com_4G.) and click Properties.

Windows 10

5. Select Internet Protocol Version 4 (TCP/IPv4) and click Properties.

Windows 10

6. Select Use the following IP address, then set IP address to 192.168,1.x (You can choose x to any digit number. If you are not sure about this, use 192.168,1.14.). Set Subnet mask to 255.255.255.0 and set IP gateway to 192.168.1.1.
 

Read Also:  2 Methods to Fix “COM Surrogate(dllhost.exe) has stopped working” error on Windows 10

Windows 10

7. Under Use the following DNS server addresses, then set the Preferred DNS server to 208.67.222.222 and set the Alternate DNS server to 208.67.220.220.

Windows 10


8. Click OK button.

Solution 4: Uninstall wireless adapter driver

The problem can also be caused by faulty network driver. Try to uninstall the wireless adapter driver and allow Windows to reinstall the driver.

Follow steps below to uninstall the driver.

1. Go to Device Manager.

2. Expand categories “Network adapters”. Right-click on wireless device and select Uninstall.

Windows 10

3. Then click “OK” button to confirm the Uninstall. If you see “Delete the driver software for this device.” at the bottom corner, before pressing OK, check the box next to it.

Windows 10

4. Reboot your PC. 

 

Solution 5: Update the drivers

The steps above may resolve the problem, but if they don’t, try to update the drivers. or you’re not confident playing around with drivers manually, you can do it automatically with Driver Easy.

Driver Easy will automatically recognize your system and find the correct drivers for it. You don’t need to know exactly what system your computer is running, you don’t need to risk downloading and installing the wrong driver, and you don’t need to worry about making a mistake when installing.

You can update your drivers automatically with either the FREE or the Pro version of Driver Easy. But with the Pro version it takes just 2 clicks (and you get full support and a 30-day money back guarantee):

1) Download and install Driver Easy.

2) Run Driver Easy and click Scan Now button. Driver Easy will then scan your computer and detect any problem drivers.

Windows 10

3) Click the Update button next to a driver to automatically download and install the correct version of this driver (you can do this with the FREE version). Or click Update All to automatically download and install the correct version of all the drivers that are missing or out of date on your system (this requires the Pro version – you’ll be prompted to upgrade when you click Update All).

Windows 10

Hope the solutions here help fix your WiFi doesn’t have a valid IP configuration problem on Windows 10. 

Scroll to Top